Christmas deals early: Save Up to 30% now!
How to Fix Mercedes NTG4.0 system shows "no signal"
05.20.2023 | Ugode | FAQ

 Please check the followings:

  • If the original CD/headunit is turned on.

 

  • The original LVDS of the Mercedes NTG4.0 system is 10-pin, before connecting to the LVDS of the Android screen (4-pin), you need to connect it to the LVDS converter box.

    Please note that there is a power cable (NTG4.0 LVDS 12V) on the LVDS converter box, which connects to the "NTG4.0 LVDS 12V" on the RCA cable.

 

  • If your car has optic fiber(Ignore if no optic fiber), need to relocate it to android harness  Click for details

 

  • Check if "CAN Protocol" is chosen correctly(according to your car's NTG system), Routes: Setting ->Factory (code"2018")->"CAN Protocol"

 

  • Please make sure that the small white connector on the Android power harness is connected to the plug marked as "NTG4.0"